The difference between Trim and Molding
Believe it or not, there really is no difference between Cut Y Molding. In the flooring industry, installers, dealers, and sales representatives often refer to these items interchangeably. It would be much less confusing for consumers if there was a universal term, unfortunately there isn’t. For the purposes of this article we will refer to them as Trim/Molding.
First Moldings/moldings are made of
1.Wood – Wood trim is generally used when you want to create a consistency between the wood and the trim. Wood trim/trim/trim is best used for laminate and hardwood floors that can be stained. Like the pine that has the widest variety of dyes Trim/Molding. Most types of hardwood floors trim/molding they can be purchased locally, while there are some that may need to be special ordered. For example, most home hardware stores more commonly stock oak, while teak can be a custom order.
Prayed
2 MDF -(Medium Density Fiberboard.) Made from wood scraps and plant fibers compressed with a binding material, such as glue, and pressed to form a sheet material used in construction as a base for floors to be covered with a veneer or finish surface.
Some of the advantages of MDF They are that it is dense, flat and rigid, has no knots, is easily machined and is more economical. Because it is made up of particles, it does not have an easily recognizable surface grain and can be painted to produce a smooth, quality surface. Because MDF It is grain free, can be cut, drilled, machined and filed without damaging the surface.
Cut /moldings It comes in many different products and styles. Here’s a quick breakdown of some of the most popular types and their exact function:
baseboards- The most important function of skirting boards is that they are used to support floating floors such as laminate.
Fingerprint – Works like the actual walking surface used on stairs and steps
ascent tube – Available in various widths, and are used to create the vertical “lift” in one step.
sniffing — also commonly known as stair nose, bull nose, stair trim, landing tread. Their thickness is the same as the flooring (3/4″ or flooring material can also be used). They are used to create finished edges on a top step, around a staircase, or in a sunken living room.
.
Shoe (base shoe) — They are used on vertical face foundations to complete an expansion deck and are also flexible enough to conform to uneven surfaces.
reducer – (transitions) – Used to smoothly transition in the thickness of a hardwood floor to a thinner or thicker surface (hard tile or carpet), typically used in door openings.
quarter turn — a full quarter turn; from 1/2″ to 1″; used as a shoe in some areas.
base (base plate) –Used to protect a wall and “frame” the hardwood floor.
.
Finish Cut/moldings it should always match your hardwood floor or be painted to match the other nearby trim. Be sure to order the right hardwood flooring accessories [http://floorsbydavid.com/index.php?cPath=1100&osCsid=7c683e3dee5913fd87091205cfb26a2c]. to maintain its appearance is better.
Trim/Moldings they come in exactly the same shapes and sizes throughout the country. This means that if you see a particular type in one place, it will be beneficial for everyone else as well. This is great for you because it makes price comparison a breeze.
in conclusion understanding Trim/Moldings and using the correct type and style will improve your wooden floor decoration, make a good facilities, and speaks well of the installer and you. The key is to make sure these details are addressed before or during installation. Good luck!